Protective cover 18,5 cm / 6“
for Art. 321
Archives: Products
Hand protection
Hand protection
for Art. 321
Cover set for chainsaws
Cover set for chainsaws
for Art. 321
Adjustable nozzle direct jet or nebulization
Adjustable nozzle direct jet or nebulization
plastic, with FPM-seals, for item 306
90° connector with joint for irrigation pipe
90° connector with joint for irrigation pipe
for item 301, 302, 303, 304
Head
Head
for item 300
Adjustable nozzle direct jet or nebulization
Adjustable nozzle direct jet or nebulization
plastic, for item 300
Battery vacuum and blower 21 V
The Battery vacuum and blower 21 V is the ideal tool for vacuuming up dust, material residues and liquids in the home, on workbenches and in workshops. It also has excellent cleaning performance on fabrics and for car interiors. Changing the inlet of the suction hose activates the Blower mode, which is useful for small gardening jobs such as leaf collection.
The vacuum has 2 power levels and is equipped with a HEPA Class M filter (Art. No. 628) for high work efficiency. The filter is washable with water and captures 99 % of dust down to 1 micron.
The 10-litre tank is equipped with a safety function when vacuuming liquids: the vacuum switches off when the water reaches a certain level in the tank.
The vacuum is supplied with a hose that can be extended up to 2 m, a carrying strap, a flat nozzle and a wand nozzle. The latter are housed in the lower part of the tool.
It has an autonomy of up to 47 minutes depending on the power level selected and the STOCKER POWER 21 V battery used. In fact, it is compatible with POWER 21 V batteries, but these are not included in the package, nor is the charger.
Technical characteristics:
– Weight: 3,360 g
– Dimensions: 38 x 26 x h 29 cm
– Rated power: 200 W
– Air volume: 600 l/min (power 1) and 800 l/min (power 2)
– Noise: < 83 dbA
– Battery included: NO
– Battery charger included: NO
– LINEA POWER 21 V compatible: YES
3-in-1 car wash soap 1 L
Car wash soap with 3-in-1 formulation: degreaser, detergent and polish.
Specifically designed for car cleaning, it maximises its performance when diluted in water and applied through a pressure sprayer with a special foaming nozzle (Art. 307).
Directions for use:
Dilute in water between 2.5% and 5% and apply with a dispensing pump, leaving to act for a few minutes. Then remove the foam from the car with a high-pressure cleaner or with plenty of water (high pressure).
pressure). In the case of more stubborn dirt, repeat the treatment.
Composition:
EC Reg. No. 648/2004 – Contains: <5% Anionic surfactants, <5% Non-ionic surfactants. Preservatives: Phenoxyethanol. CI 18050. CI 19140. CI 16255.
Quantity: 1 litre
Foam nozzle
Foam nozzle
plastic, with FPM-seals, for item 307